Questions we get asked, answered straight.

Yes. We provide free, no-obligation roof inspections. We get on the roof, photograph everything, and give you an honest detailed inspection report the same day!

Yes. Our experienced team guides you through the insurance restoration process with clear communication and careful documentation. We inspect the damage, provide photos and supporting information, meet with your adjuster, review the approved scope, and coordinate the roofing project through completion, helping make the process smooth, organized, and less stressful.

Yes! Our experienced team carefully documents the damage, reviews the insurance estimate, communicates with your adjuster, and submits legitimate supplements for anything that may have been overlooked. We advocate for you throughout the process to help ensure you receive every dollar and benefit you are entitled to under your policy.

Yes. We are a licensed and insured roofing contractor, so your project and property are protected from start to finish.

Yes. We install and repair commercial systems including TPO, EPDM, and modified bitumen membranes, plus protective roof coatings for flat and low-slope buildings. Our in house crews install closed cell foam as well.

We are GAF factory-certified, which means extended factory warranties are available on qualifying roofs we install. We also work with trusted brands like Owens Corning, CertainTeed, and Atlas.

It usually comes down to how widespread the damage is. If curling, cracking, or granule loss covers most of the roof, or if you've had several separate repairs in the last few years, replacement is generally the more cost-effective path than continuing to patch. A roof with isolated damage on an otherwise sound surface is more likely a repair candidate.

Timeline depends mainly on the size of the roof, the material chosen, and weather during the project. Steeper or more complex rooflines and premium materials like metal or upgraded shingles add time compared to a straightforward asphalt tear-off and reinstall.

We're GAF factory-certified, which makes extended factory warranties available on qualifying installs, and we also work with brands like Owens Corning, CertainTeed, and Atlas depending on what fits your home and budget.

It depends mostly on the size of the roof, the number of layers coming off, and how much decking needs to be replaced once we get down to it. A straightforward tear-off and reinstall on a typical home moves faster than one with hidden decking damage or multiple roof planes, which is why we give you a real timeline after the inspection rather than a generic estimate.

Repair makes sense when the damage is isolated, like a section hit by a falling limb or a handful of shingles lost to wind, and the rest of the roof is still sealing and flexible. Replacement makes more sense once curling, granule loss, and brittleness show up across most of the roof, because at that point new repairs won't hold any longer than the shingles around them.

Roof size and pitch are the biggest factors, along with how many layers of old shingles have to come off and how much decking turns out to be damaged once we get down to it. Adding ventilation upgrades or upgraded underlayment at that point also affects the total, which is why we walk the full scope with you before any work begins.

Timing depends on the panel style, the roof's complexity, and how much decking work is needed once the old roofing comes off. A simple gable roof with straightforward panels moves differently than a roof with multiple valleys, dormers, and transitions, so we give a real timeline after inspecting your roof.

It depends on how your current roof has performed and how long you plan to own the home. Homeowners who've dealt with repeated storm damage or want a longer-term roof system tend to see the most value in metal, while a home with a straightforward roofline and no history of storm trouble may do just as well with another asphalt shingle roof.

Panel style is the biggest factor, since standing seam and exposed fastener systems price differently, along with roof complexity, decking condition, and how many penetrations and transitions need custom flashing. We walk through all of that with you during the inspection before quoting the job.

Not usually. Most tile is salvageable and gets removed, staged, and reset once the underlayment and decking underneath are replaced, with only cracked or broken pieces swapped for matching replacements.

Repair cost depends mainly on how many areas need attention and how accessible they are, not just the size of the visible stain inside. A single pipe boot or a short flashing run is a smaller job than a repair that involves opening up decking, and we'll walk you through exactly what's driving the scope before any work starts.

In most cases, yes. Leaks at flashing, pipe boots, and isolated shingle damage are repaired in place, and a full replacement is only necessary when the damage or the roof's overall age has spread well beyond one section.

Yes, we provide free, no-obligation roof inspections. We get on the roof, photograph what we find, and give you a same-day inspection report so you know exactly what's going on before deciding on repairs.

Water travels along the roof decking before it drips through the ceiling, so the visible stain is often feet away from the actual entry point. That's why a proper leak repair always involves checking the roof and the attic together instead of just patching under the stain.

The main factors are how many entry points there are, whether the decking underneath needs repair or just the shingles and flashing on top, and how much of the roof is affected. A single flashing issue costs far less to fix than a leak that's been running long enough to damage the decking.

Caulk and sealant are a temporary fix, not a permanent one, because the flashing underneath is what actually sheds water. If the step flashing, counter-flashing, or flashing kit has failed, resealing the surface will only hold for a short time before the leak returns.

In most cases, yes. Flashing repair is typically isolated to the joint itself, whether that's a chimney, skylight, or vent, and doesn't require pulling shingles beyond what's needed to reset the flashing properly.

The type of flashing, how many joints are affected, and whether hidden rot has developed behind it all play into the scope of the work. A single pipe boot swap is a much smaller job than resetting flashing on a chimney with a cricket or repairing rotted wall sheathing behind it.

Yes, in most cases a handful of missing or creased shingles is a straightforward spot repair, especially if the rest of the roof is in good shape. A full replacement only becomes the right call when the seal failures are showing up across most of the roof, which usually means age is the underlying issue rather than a single storm.

We match the repair to your existing shingles as closely as the available material allows, though some color variation is normal since shingles weather and fade over time. On roofs with significant sun exposure, a slight difference between old and new shingles is expected even with a good match.

It depends on your policy and the extent of documented damage, but our team documents everything thoroughly, reviews the insurance estimate, and submits legitimate supplements for anything that may have been overlooked so you receive what you're entitled to under your policy.

As soon as reasonably possible, since insurance policies limit how long after a storm a claim can be filed. A prompt inspection also makes it easier to tie damage to a specific event rather than general wear.

The most reliable way is a close inspection on the roof itself, since bruising and granule loss rarely show from the ground. Look for granules piling up at the downspouts and dents on vents or gutter caps as early clues, then have someone walk the slopes to check for soft spots in the shingle mat.

Whether a claim is approved depends on the extent and pattern of the damage and the terms of your specific policy, not on how the roof looks from the street. We document every slope with photos and test-square counts, and if you file, we meet with your adjuster and review the approved scope so nothing gets missed.

The inspection itself typically takes an hour or two to document properly. The repair timeline after that depends on how much of the roof was affected, whether it's a targeted repair or a full replacement, and whether an insurance claim is part of the process.

Often, yes, if the damage is limited to a section of the roof and the surrounding shingles still have a good seal. We check the whole roof during the inspection to confirm whether it's a targeted repair or whether the seal has failed broadly enough that a replacement makes more sense.

Wind damage typically shows as lifted, creased, or missing shingles concentrated at edges and the ridge, while hail damage shows as scattered bruising and granule loss across the whole roof surface. We document each differently since adjusters look for different patterns depending on which type of damage is being claimed.

From the ground you might notice shingles that look slightly raised at the edges, a visible gap where a shingle is missing, or debris from the roof in the yard after a storm. Much of the actual damage, especially creasing, is only confirmed by walking the roof.

Yes, we meet with your adjuster on site and walk through the documented damage together. You stay in the loop on every decision, but you're not the one trying to explain roofing terminology to an adjuster on your own.

A denial isn't always the final word, especially if the initial inspection was incomplete. We review the denial against our own documentation and, where the damage supports it, help put together additional evidence for a second look.

It depends on how much of the membrane is still sound. If the damage is isolated to a few seams or small areas, a coating or targeted repair can extend the roof's life. If blistering, cracking, or ponding covers most of the surface, a full membrane replacement is usually the more reliable long-term fix.

We install and repair TPO, EPDM, and modified bitumen membrane systems, along with protective roof coatings, matched to the building and its existing roof structure.

Most commercial roof repairs and coating work happen entirely on the exterior and don't require interrupting business operations inside. Larger membrane replacement projects are scoped with the building's use in mind.

Service life varies with the system, the installation quality, and how much rooftop traffic and sun exposure the roof takes on. Regular inspections and prompt seam or flashing repairs extend that life; deferred maintenance shortens it.

Cost depends on how much of the membrane is affected, whether the deck or insulation underneath needs replacement, and how accessible the roof is for equipment. A documented inspection is the starting point for an accurate scope.

Yes, in many cases. Localized seam failures, isolated punctures, and small blisters are typically repairable, while widespread membrane aging or repeated leaks across the roof usually point toward replacement.

It comes down to how widespread the damage is. A localized puncture, seam, or ponding issue is typically a repair, while a membrane that's failing in multiple, unrelated spots is usually telling you it's near the end of its life and replacement is the better investment.

Cost depends on how much of the membrane and insulation is affected and how the roof is accessed. A documented inspection is what turns that into an accurate number rather than a guess.

Emergency repairs to stop active water intrusion can be done in most conditions, though permanent membrane repairs generally need dry conditions for proper adhesion or welding, which we account for when we schedule the work.

It depends on the coating type, the condition of the roof underneath it, and ongoing maintenance. A coating applied to a sound membrane with proper prep work extends the roof's useful life well beyond leaving it uncoated.

If overflow happens even right after cleaning, the problem is likely sizing or pitch rather than debris, and that points to a replacement rather than a cleaning. If overflow only shows up after leaves build up, a cleaning and maintenance schedule may be enough.

It depends on your roof's size and pitch, which determine how much water the gutters need to handle in a heavy rain. We install both seamless 5-inch and 6-inch systems and can recommend the right size after inspecting your roof.

In most cases, yes, as long as the fascia is still sound. If overflow has already caused rot behind the gutter, that fascia needs to be replaced first so the new gutters have something solid to hang on.

It comes down to the size of your roof and how much water it sheds in a hard rain. Larger roofs, steeper pitches, and homes with more roof area feeding a single run generally call for 6-inch gutters and larger downspouts, while smaller roof sections often do fine with 5-inch. We size each run to the specific roof during the visit rather than defaulting to one size for the whole house.

Cost depends mainly on the linear footage of gutter needed, the number of downspouts and corners, and whether any fascia repair is needed before installation. A straightforward single-story home with simple rooflines costs less than a home with multiple stories, valleys, and long runs. We give you a clear look at the scope during the visit before any work starts.

Yes, seamless gutters come in a range of colors and we match them to your roof and exterior trim as part of the installation. Since the gutter is formed on site to the exact length needed, there are no seams to clash with the color, just a clean line around the house.

Most sagging sections can be repaired by correcting the hangers and pitch, especially if the fascia behind them is still solid. If the fascia has rotted or the gutter has pulled loose in several places along the run, replacement of that section, or the whole run, often makes more sense than repeated patch repairs.

It depends on how much of the run needs attention and whether the fascia behind the gutter needs repair too. A single loose hanger or resealed seam is a small job, while a run with rot behind it or multiple failed sections costs more. We'll walk the gutters with you and explain what's needed before starting.

If cleaning doesn't solve it, the problem usually isn't debris, it's pitch, sizing, or a damaged section that clogging masks. We check the slope and downspout capacity during the visit, not just the debris, since a clean gutter with the wrong pitch still overflows.

No, guards reduce how often you need to clean, they don't eliminate it entirely. Fine debris, seed pods, and heavy pine needles can still work past some guard types, so most homes with guards still need an occasional check, just far less often than without them.

The clearest signs are an upstairs that stays hot despite the AC, cooling bills that keep climbing, or shingles aging faster than expected. A visual check of the intake and exhaust vents, along with attic temperature and airflow, tells us whether the system is undersized, blocked, or working as it should.

Cost depends mainly on how much of the roof needs new venting, whether the attic requires added intake as well as exhaust, and whether a radiant barrier is included as part of the work. A simple turbine or vent swap is a smaller job than a full ridge vent and radiant barrier system installed across the whole roof.

Yes, ridge vents, turbines, and solar-powered attic fans can typically be added or upgraded on an existing roof without a full replacement. A radiant barrier is easiest to add during a roof replacement, but standalone attic-side installation is also an option depending on the attic's layout.

Not well. A ridge vent needs intake at the eaves to pull fresh air through the attic and push the hot air out the ridge, so we always check the soffits before adding one.

Yes, a ridge vent can be cut into an existing roof as long as the shingles and decking around the ridge are in good shape, though it's also a natural addition during a full replacement.

The cost mainly depends on the length of the ridge, whether the soffits need any work to open up intake, and whether it's a standalone job or part of a larger replacement. We look at all of that during the visit before giving you a number.

Common signs include a musty smell, staining on the underside of the roof deck, rooms below the attic that stay hot, or frost on nail tips in winter. An assessment measures the actual intake and exhaust rather than guessing from these symptoms alone.

It's less common than too little, but exhaust without matching intake can pull air from the wrong places, including back through gaps meant to let air out. That's why we measure both sides together instead of just adding vents.

The assessment itself is a diagnostic visit, and what it costs to fix anything found depends on what's actually wrong, whether that's blocked soffits, a fan that needs rerouting, or added exhaust. We'll walk you through the options and what drives the cost after we've had a look.

Heat escaping from the living space into the attic melts snow on the upper roof, and that water refreezes at the colder eave, building a ridge of ice that backs water up under the shingles. It's an insulation and ventilation problem more than a roofing problem.

It depends on how widespread the damage is and how much life the current roofing material has left. A few missing shingles or a single leak is usually a repair, but widespread hail bruising, granule loss across the whole field, or a roof already near the end of its expected lifespan usually points to replacement. A free inspection is the fastest way to know which situation you're in.

Coverage depends on your specific policy, but wind and hail damage is a common claim type across DFW, and most homeowners policies address it, typically with a separate deductible for that category. We document the damage, review the adjuster's estimate, and submit legitimate supplements if something was missed, so you get what your policy actually owes.

It depends on how much of the roof is affected and how the material has held up overall. Isolated damage, like one section of missing shingles or a single leak, is often a repair, while widespread bruising, granule loss, or a roof already near the end of its usable life usually points toward replacement. An inspection is the only reliable way to tell the difference.

In many cases, yes, but coverage and deductibles vary by policy, and wind and hail damage often falls under a separate, higher deductible than other claim types. We document the damage, review the adjuster's scope, and submit supplements for anything overlooked so the claim reflects the real cost of the repair.

It comes down to how widespread the damage is and how much life the roofing material has left. A single leak or a handful of missing shingles is usually a repair, while widespread hail bruising or a roof nearing the end of its expected lifespan usually calls for replacement. A free inspection settles the question quickly.

It depends on your policy, but wind and hail claims are common across this part of Texas, and most homeowners policies address them, often with a separate deductible category. We inspect the damage, review the adjuster's scope, and submit supplements for anything missed so you get the coverage you're paying for.

It depends on how much of the roof shows bruising and how much material life is left overall. A handful of impacted shingles in one area is often a repair, while widespread granule loss across the whole roof or a system already near the end of its life usually means replacement. A free inspection settles it fast.

Coverage depends on your specific policy, but given how frequently hail hits this city, most homeowners policies address it, typically with a separate wind and hail deductible. We document the damage, review the adjuster's estimate, and file supplements for anything overlooked so you receive the full benefit you're entitled to.

It depends on how widespread the damage is and how much life the current material has left. Isolated missing shingles or a single leak is usually a repair, while widespread hail bruising or a roof already near its expected end of life usually points toward replacement. A free inspection is the fastest way to know which applies.

It depends on your policy, but wind and hail damage is a common claim type across this part of Texas, and most homeowners policies address it, typically with a separate wind and hail deductible. We document the damage, review the adjuster's scope, and submit supplements for anything overlooked so the claim reflects the real cost.

It comes down to how widespread the damage is and how much life is left in the material. A handful of missing shingles or a single flashing leak is usually a repair. Granule loss across large sections, multiple bruised areas from hail, or a roof already near the end of its expected life usually points to replacement, and a free inspection will tell you which side of that line your roof falls on.

It depends on the cause and your specific policy, but wind and hail damage is commonly a covered peril, often with its own separate deductible as noted by the Texas Department of Insurance. We document the damage, review the estimate against what we find on the roof, and communicate with your adjuster so nothing gets missed.

Cost depends on the extent of the damage, the roofing material, the pitch and access, and whether decking underneath needs replacing. A small flashing repair costs far less than a repair involving multiple damaged sections. A free inspection gives you an accurate scope before any work starts.

Insurance coverage depends on the cause of damage and your specific policy terms, but wind and hail are commonly covered perils, often carrying a separate deductible per the Texas Department of Insurance. We document the damage, meet with your adjuster, and review the approved scope so you get what your policy owes you.

Hail damage often isn't visible from the ground, showing up instead as bruised spots in the shingle mat, dented soft metal like vents and flashing, or granule loss in the gutters. A close inspection on the roof itself is the reliable way to know for sure, which is why we offer free inspections with a same-day report.

Hail is commonly a covered peril, though the deductible structure can differ from other damage types per Texas Department of Insurance guidance. We help document the damage, meet with adjusters, and review the estimate to make sure the approved scope reflects what's actually needed.

Repair makes sense when damage is limited to a specific section, like a flashing leak or a handful of shingles. Replacement makes more sense when damage is widespread, when the roofing material is already near the end of its expected life, or when repeated repairs are becoming a pattern. An inspection will tell you which side of that line your Irving roof is on.

Start with a documented inspection that photographs the damage clearly, then contact your insurer to open a claim. Since wind and hail deductibles often differ from other damage per the Texas Department of Insurance, it helps to know your specific policy terms going in. We can meet with your adjuster and review the estimate to make sure nothing is overlooked.

Cost depends on the size and pitch of the roof, the material chosen, how much decking needs replacing, and access around the property. A free inspection gives you a specific scope and answers before any commitment is made, rather than guessing from a general price range.

Wind and hail damage is commonly a covered peril, though the deductible often differs from other types of loss per Texas Department of Insurance guidance. We document damage, communicate with your adjuster, and review the estimate for anything overlooked so the claim reflects what the roof actually needs.

The clearest sign is attic temperature. If your attic feels 40 to 50 degrees hotter than the outside air on a summer afternoon, airflow is likely inadequate. Curling shingles, high summer energy bills, and musty odors in winter are other tells.

The widely used industry rule is 1 square foot of net free ventilation area for every 150 square feet of attic floor space, split evenly between intake and exhaust. Some setups with a vapor barrier can use a 1:300 ratio, but 1:150 is the safer default in Texas heat.

Ridge vents work continuously without moving parts and blend into the roofline, which is why they're the standard exhaust choice on most modern installs. Turbines can move more air on windy days but sit idle in calm weather, so many homes use a mix or pair turbines with solar-powered vents for consistent draw.

It can, because a cooler attic means less heat radiating down into living spaces, which eases the load on your air conditioner. The bigger and more consistent win is usually extending the life of your shingles and roof deck by reducing heat and moisture damage.

Three-tab shingles are flat, single-layer, and generally the most economical option, while architectural shingles are laminated with multiple layers for a dimensional look and typically carry a longer expected lifespan. Most homes built or reroofed in Texas in recent years use architectural shingles as the standard.

Yes, steeper roofs take longer to work on safely and often require additional fall protection, which adds labor time even though the material cost per square stays the same. A low, walkable roof is generally quicker and less expensive to install than a steep one of the same size.

Quotes vary based on shingle grade, whether old layers need to be torn off, the complexity of the roofline, and what underlayment and accessories are included. A quote that looks like a bargain may be leaving out tear-off, disposal, or code-required upgrades that a more complete quote includes.

Generally yes, since metal and tile materials and installation labor cost more upfront, though they can last considerably longer than asphalt shingles. Asphalt shingles remain the most common choice in North Texas because they balance cost, performance, and appearance well.

Typically not by much, since most manufacturers price a given shingle line the same across their color range. Availability of a specific color can occasionally affect lead time more than price.

A roofing square is a unit equal to 100 square feet of roof surface, used industry-wide to measure material and estimate labor. A 2,000 square foot roof surface, for example, is described as 20 squares.